Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiHas anybody ever successfully connected the SSMS to a Active Directory?I'm failing the synchronization of the LDAP groups although sniffing the access all data are polled correctly from the directory. I get the following "gidnumber" error message.A...
Hi
Are there any useful dashlets for an ISE that is only doing TACACS/device administration?
Our plattform is authenticating,authorizing and command authorizing 7'000 network devices, that are being polled continuously by Prime and SNTC, and the defa...
Hi
Just wanted to upgrade the CIMC firmware on a SNS-3594-K9 appliance, which is basicly a C220M4 UCS server. But the ISO image (from Cisco) for the firmware upgrade comes without the necessary signature for UEFI Secure Boot. Unfortunately the SNS-35...
HiIs there a way to do location based authorization rules in the ISE. We need that for giving out different authorizations to VPN users based on their location they are connecting from. RegardsRoberto
HiIs there a way to provide all the necessary intermediate certificates to an ACS v5.3 so that it can provide the full chain to the client during a 802.1x PEAP authentication?Already tried to install the EAP certificate with the chain and also instal...
Are there plans to support something like the UCP service on the ACS? Because misusing the MyDevices portal is an interessting idea. But that does not support to change the enable password.
Hi
Did you deploy the DCNM with 1 or with 2 NICs? I tried to deploy the OVA with only 1 NIC (as described in the documentation) which resulted in corrupted Linux system. Lots of shell scripts where not correctly installed, critical symbolic links whe...
Actually it's not part of the authentication, rather than of the authorization. There we can do a lookup, independent of the authentication. The ASA gives us the public IP of the VPN client in the "Calling-Station-Id" RADIUS attribute. That one we ca...
