Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi!I try to configure DHCP relay on Cisco WLC 5760.I configured "ip helper address" on user interface vlan. But this is not work.When I configure "debug ip packet" i see dhcp requests with source IP - user interface vlan. But this packest outgoing fr...
I have several indoor AP 3600 with mesh soft and WLC 5760.I need to join these APs to convert to local mode but i can't. Jan 17 15:38:00.274: *spamApTask0: 1 wcm: %LWAPP-3-RADIUS_ERR: Could not send join reply, AP authorization failed; AP:34:db:fd:4...
DHCP requests - it is ok for this AP. Can you enter username and password?If you press "enter", will you see "username" promt? What about console settings? Bits per sec : 9600
Data bits : 8
Parity : none
Stop bits : ...
Hello,
1. You need at least 50 licenses on 5508 for HA Standby mode.
2. You can rehost 25 licenses from one to antonter (you need to email licensing@cisco.com). You can not rehost manufactored licenses from 5508 but there is not part number 5508-75 a...
Hello,
there are many options to configure on WLC: 802.11r ( Fast Secure Roaming), 802.1k - neighbor reporting, 802.11v - BSS Transition Management, CCKM/OKC roaming for Voice
http://www.cisco.com/c/en/us/td/docs/wireless/technology/wlc/82463-wlc-c...
