09-20-2017 01:18 AM - edited 07-05-2021 07:40 AM
Hi,
We have a WLC2054 controllor that I'm trying to connect some new 1832 AP's to. I keep getting the amber green red sequence of lights which I believe means its try to find the controller.
We are running software version 7.4.100.0. I'm assuming this will need upgrading for the newer access points to connect?
If so I could do with some help on how to do this please
09-20-2017 01:26 AM
Hi, you need the software 8.1.122.0 or higher.
https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
09-26-2017 01:09 PM
You'll need to upgrade software as previously stated. Use the link to the compatibility matrix to determine what software is compatible with all of your APs. I assume you have APs existing other than the 1800 series.
Next, refer to the release notes for that software for installation instructions:
Be mindful of dependencies, ie, if you have to upgrade to a certain version before you upgrade to your desired version (8.2.161.0 or whatever). Those are also called out in the release notes.
09-26-2017 01:13 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide