Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I use LEAP authentication on wireless clients to authenticate to ACS 4.1 Radius Server.When I use Cisco wireless card (350 series) with ACU on PC the authentication works fine. I want also other wireless clients (laptops with onboard wireless card) t...
Hi there,I'm a little confused because the config look right to me but I cannot connect to the MSN messenger and also the access to webmail (hotmail, yahoo) times-out after a while. There is no ACL or any kind of policy applied but I have the above a...
The wireless clients use PCMCIA card to associate to 1200 series APs (latest ios 12.3(2)JA). The Authentication is LEAP and whenever it gets closer to another AP the LEAP authentication starts again which means the client disassociates & (loses its ...
I have installed a 1200 AP and 350 AP with open-mac authentication using ACS Server. I use multiple ssidsand the vlan assignment is made automatically usingan ACS Server. The PCs that have WindowsXP SP1 are associated and get an IP address from the a...
I use the same code revision that you used c1200-k9w7-tar.122-15.XR2 and I have opened a tac case regarding this issue. I didn't try yet the workaround that the bug that you mention suggests. Have you tried it, does the downgrade work ok and which ve...
