Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a customer that wants have Non 802.1x aware devices to log a SSID with PSK but have the devices filtered by MAC. The remote site is on FlexConnect. They would like to lock down the SSID because a PSK gets shared around too quickly and the WAN ...
I have a 2610 with a 4E connected to a cable modem. I successfully have it connected using DHCP to acquire an IP number. I had to put a static route pointing to the default gateway that the cable compny supplies as pointing to the interface showed j...
Hi,We currently have a 7825 call manager connecting to a 4604 gateway blade on a 4006. We are connected to a 5ess Phone switch at the CO and can dial long distance numbers nationwide, but when we dial international numbers, it pauses for like 10-15 s...
The customer does not want to go to the controller for the mac filtering. They want to know if there is a way to have the AP do all of the security if the controller connection is down, PSK with MAC filtering. They realize the MACs would be need on t...
Go into the old map system and look at the Hierarchy. You can move the building from one site to a different one using the drop down commands at the top. Check which building and select move buildings then it is like the process described above. Bria...
I have tried that configuration but then I can't get out. The only config that works is pointing at the default gateway from the lease . I see "Gateway of last resort is 0.0.0.0 to network 0.0.0.0" otherwise. How does the gateway info get pointed ...
