About KRIS PATE

KRIS PATE · 04-16-2025

I am trying to setup IPMI so that the blade is automatically powered down when utilization is low. In the past this was easy to do via UCSM, but I can't figure out where the BMC MAC address is for the Blade in Intersight. I am looking at the server...

KRIS PATE · 03-28-2025

I recently set up a UCSX via IMM (Private Virtual - due to licensing). I am familiar with UCSM and typically configure OOB Mgmt IPs for each blade. I configured an IMC policy with an OOB configuration and associated an IP pool and applied it to the...

KRIS PATE · 06-28-2024

We are trying to expand our cluster to support more leafs and purchased a new APIC-L4 with the VIC 1455 (APIC-PCIE-C25Q-04). We verified that the cluster and the new server are running the same version (5.3(2c). The CIMC of the new server doesn't s...

KRIS PATE · 03-26-2019

I have tried to use both Open NX-OS with Nexus 9k and Open NX-OS with Nexus 9kv and neither are working. The first comes up okay and I can get to the server, but the NXOS device seems to have problems. For the second one I got errors during Provision...

KRIS PATE · 07-28-2017

I saw the news that vSphere 6.5 Update 1 is now available. This version no longer supports the Nexus 1000V. Is there a process doc on how to migrate from the Nexus 1000V to the vSphere vCenter DVS with minimal downtime? Better yet is there a tool ...

KRIS PATE · 04-22-2025

Hi Derek, That worked. Thanks for testing that out. Originally we tried the MAC address associated with eth0 and when it didn't work didn't think to try the MAC associated with eth1. I was on a call with TAC yesterday and we tried to find a ...

KRIS PATE · 04-17-2025

How long does it take these features to make their way to the IMM PVA? Any chance that the DC-MGT-IS-PERP-A license will ever be supported on the Cloud Intersight? We are only using PVA because this is where this license type is supported.

KRIS PATE · 04-16-2025

I don't see a bond interface. Also I don't seen an interface with the OOB IP address of my blade - 10.34.18.206 There isn't a VLAN attached to the mgmt interface, because I am using OOB and not In-band. eth0 Link encap:Ethernet HWaddr 4A:74:10:F5:...

KRIS PATE · 04-16-2025

This turned out to be the case. The IP address only gets assigned to the Blade after it is associated to a service Profile.

KRIS PATE · 07-02-2024

It turns out that the card was partially dislodged during shipping. We had to reseat the card and it is now working

Member Since	‎06-02-2009 01:55 PM
Date Last Visited	‎04-22-2025 05:57 AM
Posts	97
Total Helpful Votes Received	10

User Statistics

User Activity

IMM UCSX - IPMI BMC MAC?

IMM UCSX - OOB to blades - Is this possible?

APIC-L4 with VIC1455 - Unable to see adapter

Problems using Open NX-OS with Nexus 9k and 9kv - broken?

vSphere - Migrate from Nexus 1000v to vCenter DVS - Process or tool?

Re: IMM UCSX - IPMI BMC MAC?

Re: New Feature Releases: April 17

Re: IMM UCSX - IPMI BMC MAC?

Re: IMM UCSX - OOB to blades - Is this possible?

Re: APIC-L4 with VIC1455 - Unable to see adapter