Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,i would like to create an AA script which forwards incoming calls to specific extensions based on a date/time-range, i.e.:24.12. 09:00 to 05:00 -> Ext A25.12. 09:00 to 05:00 -> Ext B26.12. 09:00 to 05:00 -> Ext C31.12. 09:00 to 05:00 -> Ext D01.01...
Hi,we are running a CME 9.1 connected to the external phone network via a SIP trunk. Everything works fine so far, but:If we are doing calls from the outside to an inside DN which is "call-forward all" to an external phone number,(hair-pin routing) t...
Hello,we are planning to connect a 2921 ISR G2 on a branch site using 3 ADSL lines of different ISPs.The goal is to load balance the lines in order to gain more bandwith and have some redundancyif one of the links fails. So far, so good.The branch si...
Hi folks,i have a strange problem on a CCME 9.1 (2921 ISG G2).I have configured some internal voip dial-peers, which are pointing to SIP-Gateways in our internal network,and one external voip dial-peer, which points to a SIP-Proxy of an external SIP-...
Hello,i´m currently setting up Cisco Unity Express 8.6.4 in conjunction with CCME and wouldlike to deploy an AA script.The customer wants to have time of day routing applied, but also would like to have an option to disable this feature in an easy wa...
Hi Heinz, you have to add "night-service bell" to the dn configuration to mark it for night-service treatment:ephone-dn 10 dual-line number 100 call-forward all 200 call-forward night-service 300 night-service bell RegardsFrank
Hi Nadeem, > you can Download "tzupdater.jar" and "TzDataCSV.csv" from CUCM TFTP server and upload both unfortunately I don´t have access to any CUCM here, we are just running CME installations.The "tzupdater.jar" can be downloaded directly from Orac...
Hi, anyone found a solution for this? I´ve got the same problem with an 8831 conference station registered on CME, which is just displaying GMT.tftp debug shows that it´s requesting the TzDataCSV.csv, but where do I get this file from? Thanks!
