Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HI all,Question regarding a 5GHz VoWLAN deployment in the 5GHz band.Let's say you have an multiple floor building in a city environment, and you need to deploy VoWLAN on one floor in that building, during the site survey you noticed that the 2.4GHz b...
Hello,I want to install some AIR-ANT2566P4W-R antennas outdoor against the wall, the 2602e access points will be mounted on the interior side of the wall, altough the wall is 30cm thick, so I need some antenna extension cables.What type of coax exten...
Hello,In the old days I used two autonomous 1242AG access access points to create a 5GHz PtP link with 2 patch antennas (over small distance 50meters and on on private premises) to connect an small building or garage were there was no ethernet availi...
Hey Vlad,So if I am correct, you can use a AIR-ANT5140V-R (single band, 3 ports) antenna on a 1602e access point and disable the 2.4GHz band.or use this antenna on the 2602e and only enable the abc connectors.on the 2602 you can select which antenna ...
Hi George,interesting, so this means that the antenna elements are different for dual mode antenas as for single mode antennas and the radio waves comming from the access point are "tuned" towards the type of antenna (single or dual mode).so in the c...
That would be a dramatic outcome...The test case would be a bridge link on two 2602e access points with AIR-ANT5170P-R antennas over 500m, the antenna connectors only connect to 2 of the 4 access point connectors.The customer had already bought these...
