Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Group,i have 2 gateways running a SIP trunk with a SIP server. HSRP is configured on both for DATA failover. when the HSRP kicks in the SIP signalling stops working altough the 2 gateway have the same SIP configuration. how i can bind the SIP sig...
hi there,i have a Call Manager which is connect to Cisco 2800 series acting as MGCP getway. ISDN connection between the 2800 and the carrier ( telestra sydney ). the call manager is seeing the gateway and i have configured a numbering plan on the cal...
Hi Arsys, since adding the extra links to busy ports our discards dropped, however in my opinion they are still quite high. I'm still working with Cisco on it.
Hi Marcos, I don't think the E1000 adapter which is the Nexus 1000v's default adapter from the install is supported for Jumbo Frames, I thought only vmxnet3 is ?
CSCsi32425Symptoms: A router that is configured for static NAT translations may lose its external/global ARP entry for a NAT address.Conditions: This symptom is observed when traffic flows run across the router, for example, when the client is outsi...
the 0-7 mean the following: 0 - Longest match in phone number, explicit preference, random selection. 1 - Longest match in phone number, explicit preference, least recent use. 2 - Explicit preference, longest match in phone number, random selection...
