Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This document describes the use of threshold policies within UCSM to monitor they system for bandwidth hot spots. It describes the process for alerting when BW crosses a user defined threshold and provides some insight on other key error statistics ...
Muhammad,What version of CIMC are you running? What are the switch types? It is possibly a duplex/speed issue. There are settings for the CIMC speed/duplex with the latest version of CIMC. Try F8 and test different settings to see if this clears ...
Dani,Yes this is a supported topology. The one thing to keep in mind is that the Emulex HBA is not part of the UCS fabric and can not be managed by the UCSM service profile. In order to configure the card you would need to use the option ROM and or...
Cheng,The most common issue with Discovery is when a rack server server was used for something prior to integration or has some setup on the CIMC. Try connnecting a Keyboard and Mouse to the system and Press F8 to enter the CIMC configuration. Then...
Derick,Q1. Yes this card combination is suopported for UCSM integrated servers.Q2. No. The PCIe complex for the LOMs are hidden to the system by the CIMC when in UCSM Integrated mode, even when you are in Single Wire mode.Let me know if you need addi...
