cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
528
Views
0
Helpful
2
Replies

how to connect c240 to FI in direct mode

licheng19891220
Beginner
Beginner

Hi

I have upgrade fi to 2.2(1b) and the cna adapter to the newest version,

The 1225 adapter is in pci 2 slot.

then i connect 240 rack server to fi ,and the fi port is server port.

but i can not discovry 240 , and i don't konw why

any idea ? thanks

1 Accepted Solution

Accepted Solutions

smcquerr
Enthusiast
Enthusiast

Cheng,

The most common issue with Discovery is when a rack server server was used for something prior to integration or has some setup on the CIMC.  Try connnecting a Keyboard and Mouse to the system and Press F8 to enter the CIMC configuration.  Then set the CIMC to factory defaults.  After you do this connect to the FI again and try discovery.

Steve McQuerry

UCS - Technical Marketing

View solution in original post

2 Replies 2

smcquerr
Enthusiast
Enthusiast

Cheng,

The most common issue with Discovery is when a rack server server was used for something prior to integration or has some setup on the CIMC.  Try connnecting a Keyboard and Mouse to the system and Press F8 to enter the CIMC configuration.  Then set the CIMC to factory defaults.  After you do this connect to the FI again and try discovery.

Steve McQuerry

UCS - Technical Marketing

Thanks for you support

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers