Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
ASA 5555, IOS 9.2 using ASDM 7.2
I have tried everything I can think of and cannot get incoming traffic to get through my rules.I stripped it all down to one rule and still no luck. I know its something basic but I just don't get it.When I run a pa...
ASA 5555, IOS 9.2 using ASDM 7.2
Totally new to this newer way of doing NAT since the 8.4(?) changes.
So when creating a static NAT you need to create all new translated services? There are no defaults.Lets say that I have a server on the inside that...
I am going from a PIX 525 to a ASA 5555. I used the PIX2ASA config conversion tool but that would only write a config up to version 7.2 for a 5550, the 5555 is running 9.2. What changes will I need to make to the config to make it work on the 5555, o...
I have been tasked with replacing a failing 3825 with a new ISR4451. The 3825 is running 3800 Software (C3825-ADVSECURITYK9-M), Version 12.3(11)T5, the ISR4451 is running Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 1...
I am looking for antennas for 3800e APs and am having a hard time confirming which models work with each other. Does the AIR-ANT2524DW-R antenna work with the 3800e series APs?
Thanks!
Here is what I ended up with and it worked as long as the source port is 25, well in packet trace anyway, I need to try it in the production environment.
object service SMTP service tcp source eq smtpobject network Email_Filter host 10.7.0.4 descri...
FYI I am only using packet trace to check the config. I need to have it setup before I can test on the production network. If I use port 25 as the source port I do see the hit counter increase.
I only setup one NAT, its the one for SMTP
sho nat
Manual NAT Policies (Section 1)1 (inside) to (outside) source static Email_Filter interface service any SMTP translate_hits = 0, untranslate_hits = 0
Auto NAT Policies (Section 2)1 (any) to (o...
