Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi,I have several controllers with different configuration, the problem is that sometimes APs registers with other than primary or secondary specified controller and changes their configuration, how can I restric APs to register only with their prima...
Hi,I have multiple WLANs configured for acces trough 8021.x, the radius server is a Cisco ACS and user groups are created into windows Active Directory wich has a policy that sends the certificate to all domain computers, the problem is when trying ...
Hi,I have configured several WLANs with WPA2 and 8021.x which authenticate users through Radius server (Windows Internet authentication service) that conects with an Active Directory, into the AD exists one user group for each WLAN but the problem is...
Hi Leo,I need to install wi-fi network inside a wharehouse with high celling of 39 ft, there will be a few devices working in 2.4 Ghz. Testng with AIR-ANT2524DW-R dual band antennas seem to short signal range in 2.4 Ghz.Thanks for your help.
Hi,I have done some test installing a new Radius Server (Windows NPS) and adding a condition that evaluates the called station ID into the Network Policy and keeping the default IP address option into the WLC Radius server configuration and now user ...
Hi musikman,I have ugraded to 2.1 and now I can´t select unified APs into interface availability and utilization reports, I don´t know if these fature are no longer supported , I will test upgrading to 2.2regards.
