Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,My customer is running CallManager 8.6.2aSU2 in a virtualised envonment (UCS servers) and he is experiencing an issue with ad-hoc conferences. He is able to establish an ad-hoc conference call (he is the conference controller) but when he tries...
First of all, I've to say that I'm totally new at the certificates' world.My customer has a wireless network working properly, with supplicants using certificates and authenticating against a Juniper RADIUS server. Now we need to replace the Juniper ...
I've converted one ATA186 from SCCP to SIP. Now it's not registering with my CME. If followed the SIP configuration guide for the CME but it's not working. Do I have to configure something at the ATA device or it should register with default settings...
I have two CME systems connected using a SIP trunk. In both systems, SCCP was used as a signaling protocol. In that situation all works properly. Then, all phones in one site are converted to SIP. Local calls on this site work properly, but calls acr...
I've a CME installed and working properly except for one thing. I've a hunt group configured with three members: two IP phones and and analog phone connected to an ATA186. The hunt group is configured as sequential and the last member is the analog p...
The problem is that, due to network topology, I have to terminate the secondary tunnel to the same ASA's interface. It enters the central site via a different ISP (new public IP) and via NAT is translated to the ASA's outside interface. Do you think ...
Hi all,As we did the upgrade off-hours, the most part of the phones were already logged out due to timeout. Just around 50 phones were still logged in and we decided to log them out manually.Anyway it will be interesting to find something to do it au...
Thsnks a lot for your answer.Then, I've to deduce that if I've an application made by using SQL commands (like "select", for exemple) in order to directly read the info from the CallManager 4.x database and export the results to an other application ...
When a VPN is configured to use pre-shared keys and permits the VPN client to negotiate the session in aggressive mode, it sends a hash of this key in clear text, so...The solution for this should be to deactivate the option which permits the VPN cli...
