I am searching the information that indicates how many throughput do they have when stacked.
According to this doc, the topology would be chain or ring, so I guess the throughput is 10Gbps or 20Gbps.
Could someone answer this?
... View more
Dear all, we installed a new switch SG200-26P at customer side. It is connected as uplink to an existing SF200, with which they had no issue at all. Configuration is exactly the same. SG200-26P has the latest firmware 188.8.131.52 and boot 184.108.40.206. Sadly, it happen that the attached IP Phones SPA504 are rebooting randomly. IP phones have the latest firmware 7.5.6a. In the reboot reasons I have: Reboot History Reboot Reason 1: VLAN Changed(06/24/2015 12:40:57) Reboot Reason 2: VLAN Changed(06/24/2015 05:28:37) Reboot Reason 3: System 4(06/23/2015 12:59:48) Reboot Reason 4: Provisioning(01/01/2003 12:00:00) Reboot Reason 5: On the switch: 2147478598 2015-Jul-09 01:42:41 Warning %STP-W-PORTSTATUS: gi5: STP status Forwarding, aggregated (1) 2147478599 2015-Jul-09 01:42:11 Informational %LINK-I-Up: gi5, aggregated (6) 2147478600 2015-Jul-09 01:42:09 Warning %LINK-W-Down: gi5, aggregated (6) 2147478601 2015-Jul-09 01:39:40 Warning %STP-W-PORTSTATUS: gi5: STP status Forwarding 2147478602 2015-Jul-09 01:39:10 Informational %LINK-I-Up: gi5 2147478603 2015-Jul-09 01:39:08 Warning %LINK-W-Down: gi5 2147478604 2015-Jul-08 23:24:07 Warning %STP-W-PORTSTATUS: gi5: STP status Forwarding, aggregated (8) 2147478605 2015-Jul-08 23:23:37 Informational %LINK-I-Up: gi5, aggregated (59) 2147478606 2015-Jul-08 23:23:35 Warning %LINK-W-Down: gi5, aggregated (59) 2147478607 2015-Jul-08 23:01:26 Warning %STP-W-PORTSTATUS: gi5: STP status Forwarding 2147478608 2015-Jul-08 23:00:56 Informational %LINK-I-Up: gi5, aggregated (9) 2147478609 2015-Jul-08 23:00:55 Warning %LINK-W-Down: gi5, aggregated (9) 2147478610 2015-Jul-08 22:59:13 Informational %LINK-I-Up: gi5 2147478611 2015-Jul-08 22:59:11 Warning %LINK-W-Down: gi5 VLAN 1 is for Data, VLAN2 for Guest, VLAN100 for VOIP. VOIP DHCP server is located on the IPPBX UC540-BRI-K9. No issues with the IP Phones connected to the existing SF200, only on this SG200. Do you have any clue what is happening? Thank you! Best regards
... View more
Hello all, We have a customer using a UC540W-BRI-K9. They will move their office and upgrade their current 2xBRI lines to 1xE1 in order to have 30 channels. as you may all know, the VWIC2-1MFT-T1/E1= is now EoL/EoS. Will the new model VWIC3-1MFT-T1/E1= be fully supported and compatible with our UC540W-BRI-K9? It is running Software version is a bit old though... !!!!! Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 15.1(2)T4, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Tue 12-Jul-11 22:01 by prod_rel_team ROM: System Bootstrap, Version 12.4(24r)SB, RELEASE SOFTWARE (fc1) KFL-UC-01 uptime is 26 weeks, 4 days, 14 hours, 11 minutes System returned to ROM by power-on System restarted at 22:33:37 CET Thu Jul 12 2012 System image file is "flash:uc500-advipservicesk9-mz.151-2.T4" !!!!! Thanks for your advice.
... View more
Hi all, we currently have a Cisco UC560-T1E1-K9 with image uc500-advipservicesk9-mz.151-2.T2 running CUE 8.0.3 It has also a SIP trunk with another UC540. IP phones are Cisco CP-6921 with old firmware 220.127.116.11 Last weeks we had several IP phones losing some features (like "call forwarding" not working because of "feature is not enabled"). After struggling with ephone-templates it is all OK. To prevent this, we plan to upgrade the devices to the latest IOS and firmware. Cisco UC560 to Software Pack 8.6.1 Cisco IP phones 6921 to firmware 18.104.22.168 Do you have any recommendation for a smooth process? Can we for example only upgrade the image (which is included in the zip of the Software Pack)? First upgrading the IP phones then the UC? (or it doesn't really matter?) Thanks in advance for your advices
... View more