Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I've got some PAT exhausted messages on an ASA 5585 running 8.4(2)We are running NAT with PAT overload as follows:- object network student subnet 10.*.0.0 255.255.0.0object network student-nat-pool range 194.*.*.1 194.*.*.252object network studen...
HelloHas anyone experience or know if its possible to join 4400 wlc and 5508 to the same mobility group? Can't find much info out there, just want to find out if there are any gotchas. Thanks
HelloI have an open SSID on 5508 controllers - configured as anchors and need to redirect wireless clients to the wireless help page automatically once they have connected and opened their browser.Is there a simple way of doing this? I've read all ...
I am trying to get connectivity to the internet for a vrf on our network, the vrf routing is ok, the nat is ok - can see translations, but still no internet access, have noticed that there is no entry for the nat outside translated address in the a...
Could anybody give me any advise on injecting a static default route into vrf.The static route is to the internet, I can't enable vrf forwading on the fa interface as other users also use this internet connection.I am configuring a 7206 VXR 12.3(26) ...
ScottThanks very much for all your help, I've got the web passthrough working I would have really liked to have no 'accept' page and redirect straight to the wireless help site. In the end I cusomized the login.html page to show a bit of wireless h...
Thank you for your reply ScottI have tried configuring Conditional Web Redirect under the layer 3 security tab of the WLAN but get the following messageinvalid security policy [Auto-Anchor COND-WEB-REDIR]Do you know if there is another way I can do ...
ok, have just noticed that the fa0/0 connects to a 3750 at layer 2 on vlan 36, that switch has the physical connection to the external router also on vlan 36. Is it simply a case of configuring ip vrf receive delegate_wirelesson the 2 switch interfa...
HiSh ip route vrf (vrf name) just shows the eigrp routes, the vrf static route is not visibleThe internet router doesn't participate in any vrf. I'm trying to get the traffic to 'leave' the vrf and route it to the internet.Thanks for your help
