Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My device-880 routerDesign - I want the L2 ports in the 880 router to allow only 2 mac addresses,one voice one dataConfiguration- I am statically assigning mac addresses to the portslike thisSw(config)#mac-address-table static 4.4.4 interface fastEth...
R1----FRAME RELAY SWITCH----R2 102 102 1.1.1.1 1.1.1.2frame-relay map ip 1.1.1.2/1.1.1.1 102 broadcastI see that when you configure the above command on a serial interface on a router and when we enable eigrp,the ro...
B420M4 supported from 3.0.2 release
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-3-1.html#reference_0A561B21F59A413F8F263D58E28202B5
B420M4 was not supported in the first UCS mini release(3.0.1x) and yo...
Hi Barry,
There are different ISO to USB formatting tools that could be used
Personally, I've used the following windows application to create a bootable USB
https://rufus.akeo.ie/
How did you create a bootable disk previously ? and what error did yo...
I think the UCS Mini specsheet might help. Please check page 38,39 - http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade-servers/ucsmini-specsheet.pdf
It explains connectivity between B200M4 and 6324 when...
Jim. You answered your query. The NIC speed reflected on the OS depends on the number of backplane connections to the blade from IOM.
.
In 6324 FI with VIC 1340 - Each FI/IOM has 1x10G trace per blade per fabric
In 2208 IOM with VIC 1340 - Each IOM h...
I assume your UCS infrastructure is currently on 2.0/2.1?
Upgrade from 2.0.3 to 3.1.1 would need a two step upgrade from 2.0.3 -> 2.2 and 2.2 ->3.1.1e
So the steps are
1) Upgrade UCS infra to 2.2.x release
2) Upgrade blades to 2.2.x release
Procedu...
