Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I'm currently using CiscoWorks LMS on my core network. I have a couple of routers however I would like to at least show up in the topology view in CiscoWorks and be able to manage with SNMP. I realize LMS isn't the ideal software to use with th...
Hello, The problem I'm having is Cisco Works is not seeing devices outside the firewall perimeters. Obvisously CDP and SNMP is being blocked at the firewall. I have a number of seperate networks that are attached to the core network through individu...
I currently have LMS 2.1 installed with a 6509 and twelve 3550 switches showing installed in Campus Manager. On the 6509 I have fiber gig ports installed with fiber running to the 3550 fiber gig ports. I configured full duplex on the 6509 and on the ...
I currently have a port-channel set up between a 6509 and a 3550. VTP runs over this channel as well. We currently have 10 vlans, however only 2 of these will need to be configured on the 3550 switch. So I would like to do some VTP prunning to keep t...
First of all, thanks to all of you who responded. It seems I get better responses on these forums than I do with the engineers. I just got it working this morning. It ended up being that in Server Config>Setup>ANI Server admin>Snmp settings I left th...
Thanks for the reply neonsetup. I did check with that and it states the Read Community, Write Community are "OK". Even the Telnet and Enable Secret states it as "OK". That is what has me puzzled. They say Ok but still the router says about "Unknown C...
Thanks to both of you for your replies. After reviewing what you 2 supplied I don't believe I'm going to worry about CDP through the firewall,since SNMP allows management and that's all I'm really needing. Thanks again.
