If you want more details on the CCIE SAN, check out my "Ask the Expert" Forum in Cisco Certification Community beginning this week.http://forums.cisco.com/eforum/servlet/CertCom?page=mainTitle currently says Service Provider but that is being correct...
Sounds like you've got it. If your topo is thisvlan1----6k----vlan50Then your directly connected route statements will suffice - just make sure your default gateways are configured appropriately on the PCs. If you need to go beyond this topo, egvlan1...
This could very well be a bug. Sometimes there are cosmetic issues, for example if there is a policy action configured that isn't supported on the interface type. There are many bug fixes for QoS/CEF/ATM/IMA since the release you are running. I know ...
Here's a good doc that explains the differnce PVC level queue vs Interface level queue.http://www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a00800a4754.shtml
class-based policing from FE>T3 can be used to limit the amount of bw utilized upstream (or you may choose to shape upstream to a maxrate per FE subnet - class based shaping). However, there isn't much you can do for limiting downstream - unless nego...
