Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello:We are testing EMCC in our lab environment with IP communicator, EM cross cluster login is succesful, but doesnt load the device profile of the visitor. IP communicator just sits blank. However when tested individually, device profiles work fin...
Guys:Has anyone configured both a DN on Line-1 and PLAR on Line-2 on the same cisco 9971 phone, we are running CUCM 8.5, and seem to have some issues. If use SIP dial rules to make Line-2 as PLAR, it automatically makes Line-1 also a PLAR.Any tips ar...
Hello:We are going to integrate paging system with CUCM 8.X, and Cisco ISR via E&M, One of the requirement is once we connect our call, we need to send a dial string. Is there a way we could acheive it either by using a speed dial button or abbreviat...
Guys:Need some help regarding an issue we are having with OCS plug-in for CUVC-M. When we go to launch an ad-hoc meeting, we are getting "Failed to Join the meeting" error. When used wireshark on CUVC-M server to capture the packets, we are getting a...
Softphone in CUCIMOC not working after the changing the Directory number for CSF device. Desk Phone control works fine, when toggled to select soft phone, it greys out and status shows it is not connected, and at the bottom of the screen it still sho...
Jason:I read on other posts that, SCCP version on these phones has to be 8.5.2 or lower to work with CUCM 8.6(2)a with ASA Phone proxy? Can you tell me what version of the firmware you have on your 7942. We currenly have around 20+ 7965 phones curren...
Sriram:One more question, there is approximately 6 second delay when i press the Line-2 (PLAR) button. The PLAR destination is a ARD to a T-1 ckt which is not active yet. Not sure if thats the reason. But if i change the PLAR destination to voicemail...
