rick505d3
Level 1
Level 1
Member since ‎04-07-2013
‎06-24-2022

User Statistics

  • 120 Posts
  • 4 Solutions
  • 5 Helpful votes Given
  • 87 Helpful votes Received
Recent Badges
First Discussion
70 Discussion Posts
40 Discussion Posts
40 Helpful Vote
40 Replies
50 Helpful Vote
5 Discussion Posts
5 Helpful Vote
50 Discussion Posts
30 Replies

User Activity

Hi, I am setting up an ISE 3.1 cluster with dedicated PAN, MnT and PSN nodes for a customer. The certificate on ISE for Admin and EAP Authentication roles is signed by Corporate Issuing CA. The certificate contains the FQDN's of all the ISE nodes in ...
Hi,This document has these restrictions on the use of IPSec profiles under tunnels - ref https://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-2mt/sec-conn-dmvpn-share-ipsec-w-tun-protect.htmlThe tunnel source command on all tu...
Hi,I have a VPN firewall (ASA) sending syslog to ISE (2.7 patch 6). ISE has Syslog Provider configured for passive identity feature. ISE is also configured with AD as PID provider using WMI. The VPN user testuser1 is an AD user account. When a user (...
Hi,Configured an IOS device to send syslog severity debugging and above messages to Prime Infrastructure (3.9) which is acting as a syslog collector.  logging trap debugging logging host 10.10.10.10 However, I only see 'Information' and above...
Hi,In the network below, the objective is redundant reachability to prefix 1.1.1.1 (say public cloud hosting) routers csr2 and csr3 (internal network). In the order of operations, BGP was configured and verified first, followed by OSPF configuration....
Community Statistics
Member Since ‎04-07-2013 05:14 AM
Date Last Visited ‎06-24-2022 12:06 AM
Posts 120
Total Helpful Votes Received 87
Helpful Votes From
Helpful Votes Given To