Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,Is it possible to perform a rolling stack upgrade on 3750X switch stack when the uplinks are configured in an LACP Cross-Stack Etherchannel? The documentation seems to be a bit vague on that topic for IOS 12.2.58. http://www.cisco.com/en/US...
Hi, I am currently deploying a wireless network using Aironet 1250 ap's. I would like to use a few of these in an outdoor setting enclosed in a NEMA enclosures. I was going to use attach a single mast mount omnidirectional antenna to these 1250's. Wi...
Hi Aijaz,On you modified the xml file to inlude the additional severity levels were you then able to see those as filter options through the GUI?Regards,Damon
I am also having issues with End User tracking. The wired client report does not resolve the IP addresses of wired clients. However, the IP addresses of Cisco IP phones, wireless AP's, and wireless clients do appear in the client tracking reports.Lik...
To increase the SNMP timeout value for a device go toOperate -> Device Work Center -> Then select device you want to modify -> Then click EditThere will be a timeout value under the SNMP Paramaters section.I had to raise this value on a view of my de...
Thank you Reza for your response. Logically I think it will work too. I hope to be able to test this scenario in coming months. I will try and post an update after my testing.