About haidar_alm

haidar_alm · 11-10-2016

Hello,I have 2 questions regarding native Vlan configuration on VPC link trunk ports.On our infrastructure, we don't have Native Vlan configured on some of our VPC links to servers, and it's also not configured on the VPC-Link between our Nexus Core ...

haidar_alm · 04-19-2016

Hello,I normally use ASDM to check events relating to connection issues. However, I'm wondering what is the best way to use in debugging issues on a production FW with many VPNs and connections?Trying to identify VPN issues between two sites.I've got...

haidar_alm · 03-19-2016

Hi guys, I'm trying to use ASDM on ASA version 9.5(1) where I need to set up a site to site VPN with my local inside server to be NAT-ed to a different address in order to mitigate IP address Overlapping.I've seen a few examples using CLI, but I'm wo...

haidar_alm · 02-04-2016

Hi guys, I'm trying to get Site to Site VPN working on two 5505 that I have in my lab. Image attached... I've used the wizard for configuration and I believe that it all looks good. However, it doesn't work when I run the following command: Community...

haidar_alm · 01-21-2016

Hi guys, I've setup a lab with 2 x 5505 ASAs and 2 laptops trying to improve my understanding of ASAs and securityI've attached a diagram... I'm trying to get Laptop A (192.168.10.2 /24) ping/access IIS on laptop B (192.168.20.2 /24) Unfortunately I ...

haidar_alm · 04-20-2016

Hi Henrik and thank you for the reply. I also use SecureCRT and i love it! So, based on the above commands, during the troubleshooting window, change the logging buffered to debugging, and then run the:debug crypto ipsec <level> Obviously save the l...

haidar_alm · 03-23-2016

Hi Aditya, All done and working, thanks for your assistance mate. 

haidar_alm · 03-23-2016

Hi Dinesh, Worked like a treat.. many thanks for your help mate! 

haidar_alm · 03-21-2016

Ah, I saw that earlier but wasn't sure if it was for phase 1 or 2.Will update post once testing is complete.. hopefully all will be good.. Thank you for your help! 

haidar_alm · 03-21-2016

Hi Dinesh, Thanks for your reply!All configured, I'm waiting for other party to configure their end and start testing.May I ask where I can set the Renegotiation of Phase 2 in seconds?I've looked and can only find the Phase 1 as per below: crypto ik...

Member Since	‎05-15-2006 11:47 PM
Date Last Visited	‎10-09-2017 01:10 PM
Posts	123
Total Helpful Votes Received	5

User Statistics

User Activity

Native Vlan ID on VPC Links

IPSec Site to Site VPN Debug Command

Site-to-Site VPN with Source NAT

Site to Site IPSec VPN Configuration

Site to Site access through 5505 FWs

Hi Henrik and thank you for

Hi Aditya,

Hi Dinesh,

Ah, I saw that earlier but

Hi Dinesh,