Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i have configured BDI using the configuration below and the IP is now pingable but i can see traffic on the 2 ports this is why i am afraid of a loop and i stopped it. If we compare it to BVI, we should have 1 port blocked usually by STP no? Do y...
Hi, diameter server is showing as up in show diameter authentication servers but we are not able to relay the authentication requests from the ASR5k to the server, below the logs received, any idea?2013-Sep-23+18:07:13.732 [diameter 92150 debug] [1/0...
Hi,we have a WS-X6K-SUP2-2GE running CATOS software, we are facing a TCAM exhaustion.I would like to know the following:1. during an exhaustion, based on what ACLs will be kept in hardware or moved to software? the name or number gives any precedence...
We have a stack of a 3750E with a 3750X, when we turn off the master, a disconnection occurs for around one minute while only one request timeout is seen when the slave is turned off. Is this normal?Details: in other words, when the slave switch is e...
3. if one entry of a 100 entries ACL contains the 'log' keyword, what is known is that it will be treated in software but all the ACL moved to software or only the ACE with log keyword?
i think it should help also for layer2, this is what i found in my research :With LACP, the system-id uses the stack MAC address from the stack master, and if the stack master changes, the LACP system-id can change. If the LACP system-id changes, th...
ok, do you think that 'stack-mac persistent timer 0' command which is still not implemented will help in decreasing the downtime from 1 minute to mseconds or it will just decrease the time needed to reach the management IP again?
