Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The IOS documentation for the crypto map command gives the syntax ascrypto map [ipv6] map-name seq-num [ ipsec-isakmp [ dynamic dynamic-map-name | discover | profile profile-name ] ] I have a 881w ISR. In what different situations do we use the i...
I am seeing a significant degrdation of applications using X11 forwarding when I connect over the wireless versus the wired lan on the back of the unit.The ICMP latency is average 0ms, max 9ms, on the lan, as opposed to average 10ms, max 70ms, on the...
Where can I find an example config for IPSec VPN where Windows 7 native client connect to Cisco routers. I'm using the cisco 881w, in this case.Thomas McLeod
I'm using a non-overloaded pool in the 881w router with 8 inside global ips. However, once 8 hosts connect, no more can ever connect because no translations ever expire. Upon examination, it appears that ramdom tcp probes and scans from the outside a...
For those of us who like to maximize 802.11n bandwidth with channel bonding, configuring the Dot11Radio interface in the integrated AP with "channel width 40-above" can essentially double bandwidth in areas with available WiFi channels. See page 9-13...
I need to wait for the translation timeout to verify, but I believe you found the issue with the configuration. Sometimes I just takes another set of eyes on the problem.
Hi Manish,What I'm trying to accomplish is simply to have each host have it own outside ip without sharing. The ip nat translation xxx-timeout commands all have default less than or equal to the over-all translation timeout.The question is why doesn...
