Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings again;Have been getting alarms of database failures on the dashboard for ACS 5.4.0.46.2. From what I've gleaned on here, you go to the log collector and see what the errors are by going to Monitoring Configuration>System Operations>Log Coll...
Hello all;I am trying to sort out a potential issue with ACS 5.4. I log into the primary ACS device via web. When I attempt to pull up logs and monitoring tools, such as authentication pass/fails, I click on the monitoring link. This opens up a new w...
Curious to know the differences and hassles to upgrading from ACS 5.4 to 5.5. I know that there is a patch that you have to run before the upgrade itself. But is it really worth the upgrade? Just because a "new" version has come out, does not necessa...
Let me set the scenario:PC1 is attached to access swtich on port 1/0/8. Port 1/0/8 was originally switchport access vlan 10. Access switch is connected to Distro 1. SVI VLAN 10 is correctly setup: description USERS_GROUP10 ip address 10.10.10.1 2...
Greetings all! So, to start this discussion, I want to set up our network parameters so you have an understanding of our network. Without going into specifics, we are running a VSS Core with two 6509's. These are fiber connected to about 15 distro ro...
In simple terms:1. You want to lock-down PC's. You only want PC's that are authorized to be on the network to connect. If a client brings in their own PC and plugs it into the network, you want to be able to stop it from connecting. 802.1x would be t...
The config on the switch does not affect the actual PC. It tells the switch what order to attempt to authenticate with. Let's go back to basics, as it's always helpful:If the switch is configured correctly with 802.1x (.1x for short), and you have co...
Are you trying to log in remotely to the device? The error you're getting is that the shared secrets (i.e. password) between the device and the ACS server is wrong. So, the device can't authenticate. No authentication, no access.If you have aaa to do...
I've been researching the differences between 4.2 and 5.4. There is a fundemental difference in the two. In my research, I have not found anything that Cisco indicates that log files can be imported. Because ACS 5.4 has it's own robust logging and da...
