Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
One of our 3850 stack reload with
Last reload reason: Reload due to Express Setup
version : 03.03.05SE
A sh setup express showsexpress setup mode is not active
Does anyone know what causes the stack to reload with this reason "Reload due to E...
Hi,Has anyone experienced the problem where a default interface command causes the module to reset?For instancedefault int e1/10 - 11The command above resets module 1.We are using version 6.2(16).TIAPF
Hi,
Can we have different crypto maps to different interfaces as per config below?
crypto ipsec transform-set SET1 esp-3des esp-md5-hmac crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 460...
Hi,
We have a problem with the N7K not able to detect the sfp we inserted to certain ports on the module.
For instance,
on port e1/41 to e1/44 or e2/41 to e2/43 --> it is not working. The log did not have any messages that the sfp has been inserted
t...
Julio,
Thanks for your reply.Did a sh setup express and it said not active, it is not disabled?
sh setup expressexpress setup mode is not active
TIA
PF
Thanks Reza, this is the error messages on the log2017 Sep 14 10:51:08.546 TP-H7-CSW-01 %SYSMGR-SLOT1-2-SERVICE_CRASHED: Service "aclqos" (PID 2376) hasn't caught signal 11 (core will be saved).2017 Sep 14 10:51:12.681 TP-H7-CSW-01 %SYSMGR-SLOT1-2-S...
Tausif,
The sfp is still in e1/41. A sh int e1/41 below
sh int e 1/41Ethernet1/41 is down (SFP not inserted)admin state is down, Dedicated Interface Hardware: 1000/10000 Ethernet, address: d867.d902.3c42 (bia d867.d904.0244) MTU 1500 bytes, BW 100...
