Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have a somewhat very specific question.We want buy a new wireless controller 9800 but cause of delivery issues we need to connect our old WLC5508 to a HP switch. HP switch has only 25Gigabit Port. We have insert a 1GigSFP and connected WLC t...
Hi,we have done an inline upgrade of the prime infrastructure from 3.0 to 3.7 The upgrade went without any problems and the prime works as well, but there are no jobs in the dashboard. Is this normal behavior? I don't think so, but I'm not sure. Is ...
Hi Guys,I'm not sure what is the best solution to configure a Workaround for a passive Client.We have wired Clients behind Workgroup bridges (Siemens) with static IPs.Additional we have configured AP Group.Since passive Client together with AP Groups...
Hello,My customer has a traditional guest access desgin with foreign and anchor WLC without an ISE.It works fine.Now he plans to install a new WLC5508 for remote offices.All APs in these remote offices will be in FlexConnect mode connected to the cen...
Hi Wireless Gurus, I have installed a vWLC, software version 8.0.110.0and these APs are joined to vWLC: AIR-CAP1702I-E-K9 nevertheless we get this message in controller log. *spamApTask6: Feb 23 14:27:29.686: a0:ec:f9:9f:9f:60 ApModel: AIR-CAP1702I-E...
Ok, we have now connected the WLC5508 to Gigabit Port 1/0/1 instead of TwentyGig Port 1/1/4.We have used the same SFP and same Patchcables, further configuration is the same.Now it worksIt would be interesting for me to know if this problem would als...
Hi, I have configured switchport to 1000/full without autonegotiate, still doesn't work.SFP and WLC are working fine, connected to old Cisco switch.Now we are trying to connect WLC to a dedicated gigabit Port on HP switch, I let you know what happen.
Hi Balaji, thanks.It is a HPE FlexFabric 5945,and yes, we have connected other devices to 1Gig SFPs which are plugged into 25Gig Port, too.So HP switch supports 1Gig SFP.These other devices/switches are working fine This I see in show interfaceMedia ...
Thanks for answer Is it possible to install the backup from 3.1 to 3.8 version? I thought at least 3.6 is requiured: Migrate Data From Previous Releases of Prime InfrastructureYou can migrate from the following 3.6.x, and 3.7.x Prime Infrastructure v...
