Hi Experts
Can anyone clarify whether we can implement Multi-Instance/Topology ISIS whereby configuring same Interface as part of two different ISIS Instances for below Platforms.
1. IOS-XR ASR 9006, 9010
2. IOS-XE ASR 903,907 & 920
3. IOS-Cataly...
Dear AllCan anyone clarify with facts whether we can redistribute ISIS inter area "ia" routes into OSPF or not in Cisco IOS or not ? I am trying it on IOS 12.2 33-SRE and it's not working. I can redistribute all Level-1,Level-2 routes into OSPF fine...
Dear AllNeed some pointers regarding the QoS Design for my Customer Network which is Comprised of below elements:******************************************Access-Layer 2 REP Rings:******************************************1. IE3000-Platform: cisco IE...
Dear AllHow do I calculate the expected increase in CPU Load and Memory Consumption with ~150 ICMP Echo IP SLA Operations running simultaneously with 1 Sec Frequency.RegardsVarma
Dear AllNeed some pointer regarding implementing MSTP over VPLS CloudSetup is as below -------L2_Trunk------ CE2 --------L2_Trunk----------- ----------PE3 ...
Hi GaryFor a L2VPN in VLAN Mode the maximum datagram size which can be sent across an MPLS Backbone configured with default MTU would be calculated after subtracting the MPLS and L2 Headers which would be as belowMPLS 2 Labels = 8 BytesL2 Ethernet Fr...
Hi xanderI did come across that fact after some deep digging and the problem is now that my XR version does not supports access-pw under the bridge domain. I read more and found that H-VPLS is supported from XR 4.0 so now I will be upgrading the vers...
HiIn my understanding there is no direct way of leaking multicast traffic from one VRF to another VRF but we can achieve the multicast communication across different VRFs using MSDP session between the RPs of the two VRFs assuming the unicast route-l...