Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to find a way to implement QOS for a destination IP address. The traffic is port 80 traffic. But this needs to have a much higher priority to a specific server on our network over a WAN connection. I have implemented QOS for specific appl...
I am trying to find a way to implement QOS for a destination IP address. The traffic is port 80 traffic. But this needs to have a much higher priority to a specific server on our network over a WAN connection. I have implemented QOS for specific appl...
I am trying to find a way to implement QOS for a destination IP address. The traffic is port 80 traffic. But this needs to have a much higher priority to a specific server on our network over a WAN connection. I have implemented QOS for specific appl...
We had another Webex today, they told me they have been working with your account team as well on the issue.We are seeing the waits on the closed connections. Cisco siad the problem still might not be fixed in version 4.15.We tried changing back to p...
Well TAC came back with a answer. They found other people with the same issue."It was found that the applications always used the same source and destination TCP ports. WAAS has the first connection in a "WAIT-CLOSE" state so when the next packet co...
We changed our remsh port to 914 with the same results. Downgraded from 4.13a to 4.13 with same results. Problem went away when I shut down inline interface, basically creating a wire. Are you seeing every other remsh session timeout as well?I opened...
We are having similar issue with remote shell. In addition to the slowness we are getting timeouts when trying to connecting to another box, even after we kill the copy processes. Every other remote shell fails. Please post if you find out any info, ...
I was able to do it this way. I deleted all the files in flash and was able to upload the new image easily using the below steps.ap: set IP_ADDR 192.168.133.160ap: set NETMASK 255.255.255.0ap: set DEFAULT_ROUTER 192.168.133.1ap: tftp_initap: tar -xtr...
