I have a router that has two physical inside interfaces and one physical outside interface with five sub-interfaces. Four of these sub-interfaces go to privately addressed cloud networks. One sub-interface goes to a publicly addressed cloud netwo...
Hello - I am building out Nexus5548 access layer PODs in my DC. Moving the entire environment to a consolidated/converged infrastructure.As part of this process I need to make available a separate backup network vlan within the Nexus5k infrastructu...
So I am looking for thoughts on the following implementation.I have three sets of Nexus5ks (PODS) that I want to setup the peer-keepalive links for.For each POD I have configured the mgmt0 ports and connected to a L2 switch. This L2 switch is being...
Looking for the most efficient configuration to get dynamic PAT working with TWICE NAT in section 3.First I setup a object-group for the IP range to be PAT'dobject-group network obj-10.20.0.0 network-object 10.20.0.0. 255.255.0.0Next I configu...
It seems that auto-qos is not suported on port-channels or their physical interface members.In light of this, what is the best method to get QoS configured for VoIP traffic? These are uplinks to other core devices in the network. All L3 port-chan...
So I have a question regarding the port configurtion.In the autoconfiguration script there is an e0 and e1. However, on the back of the physical box there is a IMM, e1 & e2. I have configured e0 only via the script. But when I ping the defaul...
So my question is does it make sense to move to fabricpath in a mid-size enterprise data-center with SDN/ACI on the horizon?Would having fabricpath enabled either simplify or complicate a migration to SDN/ACI? Are these technologies mutually exclu...
So just as a follow-up. When the backup vlan is added to the vPC link there is indeed a L2 Loop created. STP blocks one of thelinks going to the n7k on one of the n5ks. My goal is to eliminate all L2 loops (whether physically or by using vPCs). ...
So thinking this through further I have two comments.1 - This vlan is a non-VPC vlan. So wouldn't that disqualify it from the MEC benefits of vPC? 2 - Even if both n5ks are seen as one STP entity, we still have two connections between this ...
Thank you Marvin. I was wondering that, but where the n5ks are not connecting to FEXs or a vPC'd connection to another switch (i.e distribution vPC N7k pair) I was hesitant to just add it on before triple checking.I wonder what STP would report for...