Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I had an issue where the multicast streams being published took over 4mins to recover when an HSRP failover occured.Now I know PIM is independent of HSRP and that the multicast streams were being forwarded by the standby router, so the dropof ...
Hi All,if I have a queuing scheme similar to below and when there is no congestion or realtime traffic would queuing be FIFO and when congestion occurred due to transactional traffic would the transactional be limited to using 16% of the 4M and remai...
Hi All,I have a 2921 with an 16port Ether Switch module and need to install the SM-SRE 710 for WAAS.on the 2921 G0/1 is the WAN 10.1.1.1 and the internal port G1/0 is LAN 10.1.2.1How do I assign the IP addresses to SRE module so that I can use WCCP t...
Hi All,previously I had two AD domains based on 2008 and had machines in one domain and users in another domainand the condition statement "Was machine authenticated=True" worked fine when doing EAP-TLS machine then user authentication.I have now upg...
Hi All,I am currently doing EAP-TLS for user and machine authentication for my wireless clientsdue to changes my users are now in one AD domain whilst machines are members of another AD domain,is it possible for ACS 5.5 to be a member of multiple dom...
I'm coming at this after the event, so don't have the multicast group data or outgoing interfaces at the time of the event, just the logging showing PIM DR state change. I'm trying to workout the best way to debug the problem and ensure another crash...
In the end the outgoing and incoming trusts were setup on the two AD domainsthe ACS remained joined to a single domain, but I had to install the root certificate from the other domainhas one of the known certificate authorities. After that machine au...
Hi Kashif,so with closer reading, LDAP integration is what should be used when external identity stores are two different AD domains that don't trust each other and if the domains do trust each other ACS 5.5 now support multiple AD domain integrati...
