Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All, I am currently working on the VCS Expressway deployment with a public sector client who’s security team is unwilling to open the below ports (between Internet & VCS Expressway)UDP 50000 to 52399UDP 30000 to 39999UDP 60000 to 61399TCP 25000...
Hi folks,I want to use the GSS to do only name resolution to my applications and it is going to be internal DNS so I do not want to use the ohter funtions such site selector, DDOs, etc. can I still do that as I have noticed the following announcement...
Direct SIP integration between CUCM and OCS 2007 R2 We have integrated OCS and CUCM through CUPS 7.x which is working fine, RCC from MOC, simultaneous ring on Cisco IP Phone and MOC client all this works fine. What we want to do next is Direct SIP in...
I am facing similar issue, we can dial to all numbers from the Jabber for Windows except inter cluster trunk. We have CUCM 10.0 with IM&P and ICT trunk to CUCM 8.5, from Jabber we are unable to dial any extension number on CUCM 8.5 through trunk. Fro...
Hi Paul, Thanks for your reply -Bottom nut on the camera processor box was loose.I made sure the nut is fully tight Inside male end of the processor box's power cable there is a very small two pronged pin. This pin was bent. Using a stylus the...
Hi, I am facing the same issue too, unit is stuck on step 4 and in the status detail - Telnet connection error. I tried the following without any luck - Unplugged all the cables and connected backChanged the USB cableBottom nut is full tight I had si...
Thanks Guys, Yes that make sense. I got conformation from Microsoft Tech guys that Mediation Server is must. “Mediation Server is our integration point for any telephony system (Cisco, Avaya, Nortel,….etc) , so no way to integrate without Mediati...
Thanks Sushil,Yes I have gone through this document but as said Mediation Server is required.As per Microsoft - OCS 2007 R2 can have direct SIP connection with Communications Manager 7.xReg,Musa
