Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have 5 BE6K (EOS) distributed around 4 location running CUCM 11.5 (cluster consists of 8 nodes + 2 CUC) and we bought a another BE7K for upgrading to version 14. What is the preferred to do this upgrade:
1- upgrade the CUCM cluster through PCD.
2-...
We have a cluster of CMS 3.6 and need to change the below for the meeting information:
1- Video address to the domain to be @Meet.domain instead of @cms01.domain, as outlined in the pic
2- Organized by: 9018179@domain to be username@domain, as outl...
Hi,
I know the Board Pro 75 is working with MTR, could we also pair two navigators "table stand and wall mount" with this board during MTR, and what is the license required from Microsoft side to get this solution working with MTR?
Thanks
ringback tone doesn't work in some outbound calls, I have attached two calls, one we can hear the ringback tone from the calling ip phone, and another we don't hear the tone.
call flow: IP Phone>CUCM >Sip>VG>Sip>ITSP
the calling number in both:4823
We have a CME v12.0 running on router 2921, and I uploaded the phone 7821 firmware to the router and found the message on the router that the upgrade failed, I don't know why it failed, any suggestions?
tftp-server flash:cmterm-78xx.14-2-1-0101-26/...
@b.winter
unfortunately, I get a little confused in some sip cases and don't know how to troubleshoot it. If you advise me on a book to help troubleshoot it, I will be thankful.
I also see the phone send REFER message with 400 bad request resonse
Oct 23 11:21:28.218: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:REFER sip:192.168.32.28 SIP/2.0Via: SIP/2.0/UDP 192.168.32.100:5060;branch=z9hG4bK07b1e876From: "Faizan Ahmed...
