Hi Justin,Since you have already checked all the settings I would suggest you to check ensure that the 'Enforce Management Settings on Systems' to Yes.You can find this setting in the Network Settings.Thanks,Shilpa.

Hi,Just as you mentioned, you should have seen a True for camera 9.For this you would need to check the daisy chain cable between the main camera and the second camera.Also, as a test, you could swap the two cameras and check the behavior then.This c...

Hi Nanda,I did not find any this information in the Web GUI or the CLI in the admin account.You could login to the MPS using root account and check the CPU utilization using the 'top' command.Hope this helps.Thanks,Shilpa

Johan,Firstly, is this call going through the MCU? Try the call without the MCU in call and check what happens.Also, check the command: 'xConfiguration Conference 1 VideoBandwidth PresentationChannel Weight: <1...10>' to check the bandwidth distribut...