Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I've been engaged to design and implement QoS for a customer. The environment is primarily a Campus LAN across multiple buildings in an inner city environment. The client primarily uses Catalyst 4500 with Supervisor V (classic supervisor)...
I have a client that is running ACS 5.3 as a VM in ESX 4.1. The client wants their VMWare admins to have the ability to shut down the ACS server during maintenance etc... I know I could create a CLI user with admin priviliges, however, assigning fu...
I have a client who has multiple offices all running ASA 5510's that all connect to each other through L2L vpn's and they work great. Each site also has RA vpn setup for local mobile users. One site has intermittent IP connectivity for remote users...
Appears that the VTP domain names match, but you are running VTP version 1 on the 3750X and version 2 on the 3560 (rv-tower-53) switch. I'm not sure right off hand if that causes any issues.
If you're not dealing with a large switch environment, you...
provide the full output of 'show vtp status' from both switches.
Yes, on a VTP client, it should state something to the effect of 'configuration last modified by x.x.x.x'
Technically, yes. So assume you've got your two switches connected, SW1 is the RB and SW2 is downstream. SW1 puts both interfaces as designated forwarding. SW2 declares one interface as the root port in forwarding state. The other interface is al...
You need to have all of your PfR routers at or above 15.4(3)M as well as a Data license. This version of code and above supports PfR version 3 and below it supports version 2. They are not compatible. Before you put this into production, I would HI...
