Cisco SPA504G & SPA508G display time 1 hour behind after an hour online.  When I reboot the phone it displays the correct time for 1 hour… after that hour it displays the incorrect time.  Currently running software version 7.5.7s.  DST Rule: start=3/...

I need some help.  I'm trying to dial a Cisco 1841 BRI from my Cisco 2811 PRI.  I'm getting a few errors but not sure what else to do to correct the issue.  Config & Logs below from 1841:interface BRI0/0/0no ip addressencapsulation pppdialer pool-mem...

I need some help.  I'm trying to dial a Cisco 1841 BRI from my Cisco 2811 PRI.  I'm getting a few errors but not sure what else to do to correct the issue.  Config & Logs below from 1841:interface BRI0/0/0no ip addressencapsulation pppdialer pool-mem...

When I had the following static statement configured in my ASA, I was able to ping 10.102.10.13.static (inside,outside) 10.102.10.13 10.201.10.73 netmask 255.255.255.255Now that I've changed by static statements to what's shown below, I can no longer...

I’ve been tasked to establish a VPN tunnel between our ASA5520 and another merging company with a Check Point on Nokia platform.  I’ve got a list of IKE and IPSEC parameters from the Check Point unit and it’s external IP Address.  There’s also a pre-...