Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good Day, I would like to connect to Cisco's management WLC via wireless. There is a security feature that allows you to ENABLE or DISABLE WLC management via wireless. I have enabled controller management to be accessible from wireless clients i...
Good Day,I have a problem getting a Catalyst 3560-CG POE to route the traffic between the local network and the Internet. VLAN 192 is the local network. Interface G 0/10 is connected to the ISP. When I ping the Internet from the the switch, it works....
Good day!We are trying to login to the console of a Cisco 7609 from a cisco 2821 using telnet 2821_router 2081(port number). When we do that we get the username prompt(we use a radius server). At that point we can see the 7609 logging messages that g...
I have this in the nat tablePro Inside global Inside local Outside local Outside globaltcp 199.212.17.130:1617 142.135.4.69:1617 132.206.246.112:21 132.206.246.112:21 and I want to clear just that one I go through th...
Good Day,I just wanted to add some information concerning this, as an answer. the IP address is the IP address on the WLC-AP subnet 192.168.2.5 in my case. but you need to route traffic between the public subnet and the WLC-AP subnet to get this to w...
good evening,Thank you for your reply. I did not configure the management to be routed on the routeur. I have to route the management network? That is not secure, is it? I tought the idea to put the WLC and APs on a different subnet was, in part, to ...
Good morning,Thank you for taking the time to respond.In response to your questions:"Are you able to access the WLC from wired network?" Yes, I need to put a machine (laptop or desktop) on the mangement network, 192.168. 2 .X /24 in my case, to a...
