Hi Guys,We have a Virtual WLC running 7.6. I've converted a AP1262N autonomous to LW and trying to setup a new WLAN in a separate AP and Flex Connect group. For some reason the WLAN I've created is advertised as -Internal even though I've created th...
Hi Guys,I'm trying to implement policy based routing with ip sla tracking but can't find the verify-availability option in our C4510R+E with SUP7-E. Is it available in 4510R switches?Thanks in Advance,Chandimal
Hi Guys,We have two 4510 switches in a VSS domain. One of them is crashing. Cisco has instructed to swap the Supervisor in the crashing switch to a different slot for diagnosing the issue. My question is what would be the procedure to make this confi...
Hi Guys,In the process of implementing a Virtual WLC. Just want to find out about FlexConnect Local authentication process. My question is am I able to configure FlexConnect groups to send client athentication (PEAP Authentication) requests to a loca...
Thanks for the response. I've already created a SSID by "xxxx-internal" name but on when I try to connect to the WLAN I can only see -internal not the complete ssid and I can't connect. The OS I'm running is 7.6.1. Not sure if it's bug or I'm doing s...
Hi Sumitmenaria,I can't see that option under PBR on our switches running Version 03.04.03.SG and the switch switches are 4510R+E. I've checked the latest IOS for 4510R+E but could find a version 3.13S.
Hi Guys, once license is sorted what is the correct procedure to add the switch with the new supervisor to the existing VSS domain. - update firmware and iOS to match the other switch and restore back of the running configuration to startup and rel...
Hi Reza,Thanks for you advice. It all went well. Conclusion a faulty supervisor. Yesterday I tried to add the switch to the VSS domain with the new supervisor but failed due to license. My faulty supervisor had IPBase license but the replacement supe...