Policy Based Routing with Tracking

[CHANDIMAL RATNAYAKE]

Hi Guys,

I'm trying to implement policy based routing with ip sla tracking but can't find the  verify-availability option in our C4510R+E with SUP7-E. Is it available in 4510R switches?

Thanks in Advance,

Chandimal

[sumit menaria]

Can you try to use PBR Match track object,

Device(config)# route-map abc
Device(config-route-map)# match track 2
Device(config-route-map)# end

Device# show route-map abc
route-map abc, permit, sequence 10
  Match clauses:
    track-object 2
  Set clauses:
  Policy routing matches: 0 packets, 0 bytes
Additional References for PBR Match Track Object

This feature is a part of IOS-XE release 3.13 and later.

PBR Match Track Object

Cisco IOS XE Release 3.13S

The PBR Match Track Object feature enables a device to track the stub object during Policy Based Routing. The following commands were introduced or modified: match track tracked-obj-number

Cheers,

Sumit

[CHANDIMAL RATNAYAKE]

Hi Sumitmenaria,

I can't see that option under PBR on our switches running Version 03.04.03.SG and the switch switches are 4510R+E. I've checked the latest IOS for 4510R+E but could find a version 3.13S.