Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi,I'm preparing to test the Y.1731 in my lab where i have a 7609 sup720/msfc3it's possibile to take some test with only one cisco 7609? maybe with a VRF configurationthanksciaodavide
hihere my strange situationI try to route the call from isdn to my two internal sip serverall seem ok with normal desk phonebut when I try to malke a call from my cellphone I can't reach any internal sip!!only with the "connection plar xxxxx" comamnd...
hii'm trying to substitute a router C3640 with a pix-525 (ver 7.2.2) but i can't map multiple outside addresses to one internal addressin my router config i have:ip nat inside source static tcp 192.168.5.5 80 1.1.1.1 80 extendableip nat inside source...
thanks!I removed the command "isdn bchan-number-order ascending"and this is the output of "debug isdn q931" and "debug ccsip message"from cellphone there are not sip messagethe 2 sip server are two Interactive Voice Responder******from desk phoneC28...
hi,thanks for your fast reply!but i can't change nothingi must only replace the c3640 (active from 2 years but with a constant cpu load of 90%) with a more performance firewall pixthe customer have only one server web and he map it with 100/200 exte...
hi two other things that help me to resolve a similar issue:* have you tried the c6svc-fwm-k9.2-3-3-2.bin? (if not upgrade!)* try fixup protocol dns maximum-length 1500 (the default is 512 and the fwsm drop packets that are larger than the configured...
hitry to change the default value of 3 hours in 3/5 minute:"timeout xlate 3:00:00"in"timeout xlate 0:03:00"or if nothing happendo"no fixup protocol dns"hope this helpciaodavide
