Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi folks,how that command works, and why it don't need to be configured on an ASBR that is functioning as RR?Thank you very much for your supportRegardsAndrea
Hi folk,my topology is like this:- sip-ua to a SIP ISP- nokia e65 registered on uc500/cme via SIP- 7960 registered on uc500/cme via SCCPproblem:when I try to call a .T number through the sip ISP dial-peer, the call from the phone 7960 works correctly...
Hi folks,I've to correct a 'replicate casa' configuration, but the switch is in production and I don't know if changing the IP configuration I could have a downtime.Any advice will be appreciatedRegardsAndrea
Hi folks,I need your advice I've an hub-2spokes topology, and the Customer has to implement a primary link MPLS with a provider, and a backup link MPLS with another ISP. All sites have an isolate routing process ospf (area 0) and two CE, one for eac...
Hi folks,I've a problem to connect my Cisco with cT1 PRI and Adtran Atlas 550 with T1-PRI network card. The connection doesn't work, the controller is down, and the Adtran module in Alarm. I've already check cable and modules, all at L1 is ok. The Ad...
Hi Rob,thanks for your answer. I appreciated it.My question was: why this sort of check is disabled on RR? And is it disable only on RR with clients with VRFs configured that need these rt?Thanks again for your supportRegardsAndrea
Yes I know, reboot is always the last option ... but in a VSS environment is not as critical as you can imagine.at the same time I would upgrade your IOS image.HTHAndrea