Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all, I have a question maybe someone knows about it. The customer want to buy just 1 unit Spark room Kit with device subscription. They want to use just the Spark Room Kit over cloud with SIP video address. They don't want to buy any Spark Named...
Hi,I got the information from my customer that "During the Multipoint call the Cisco 10" Touch panel mic led is flashing in red color. " and he can not stopped it. The audio is still going to the far end during the mic led flashing. The end user sys...
Dear All,I have a VCS Starter Pack with Dual Interface and NAT configuration. This is a demo setup and therefore all settings have been made with IP addresses.There is No SRV records. The customer has a Checkpoint firewall and we made NAT configüra...
Dear All,We have a demo VCS Starterpack system with CTI-ATP-VCS-SPAKK9. I made a software upgrade to X7.2 from X6.Now I want to use Dual Interface and NAT feature for customer demonstration but I noticed that there is no Dual Interface Option on th...
Hi,Codec Plus doesn't have support for 2 PTZ cameras. You can connect second camera from other HDMI interface but you will get just the HDMI video signal like any other fixed handycam.You need to use SX80 or wait for other new product series with 2 c...
Hi,The configuration will be like the below but I couldn't have any chance to test this.Smartboard will have an integration with a laptop. You will do some changes on the smartboard and this changes(annotation or other things) will be showed on the ...
Dear All,
I have made custom video layouts with SX80 codec and the software version was 7.3.
You can use Tc Console with Sx80.
You can see some pictures at the attachment.
Hi John,
Actually I would like just to remind you that People X 3 means MultiSite meeting with 3 participants on the SX80 system.
If you want to show 3 camera on the 1 screen and on the point point call, you need to select people X 1 and there are ...
