Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Community. We like to add following service policy under a specified Trunk Interface but only on a specific VLAN.-----------------------policy-map child class voice priority level 1 police cir 20000000class class-default policy-map parent class ...
Hi Community.
We have a strange behavior. We setup 802.1x with Windows NPS. The Windows 10 can connect without an issue. But the Windows 7 clients can't connect some how.
I did a "debug client" on Win7 and Win10 (attached to this post), but i don't s...
Hi Community.Our WLC 5520 AirOS 8.2.141.0 is kicking out connected Clients because it classify them as Rogue Client and Rogue AP. See log entries: Mon Sep 11 16:32:54 2017 Client Authenticated: MAC Address:e4:a7:a0:d3:c7:05 base Radio MAC:2c:33:11:fb...
Hi Community.
Until now we're using the Site Survey Kit from Caster Tray http://www.castertray.com/surveyor.html. That works great with the old Cisco AP's that uses POE. But the newer AP's uses POE+ as an example the Cisco 3802.
How you guys are doi...
Hello Community.
Our customer bought a HA SKU WLC 5508 and he want now to use that Controller as a full active primary Controller.
I read following post -> https://supportforums.cisco.com/discussion/12160596/how-can-i-configure-wlc-2504-do-ha-n1-met...
I try to do apply my config on my Lab. The switch-model is a 9200L and the IOS-XE is 16.9.4.My goal is to limit and guarantee the traffic on specified VLAN/Network Range. I modified my config often, but it looks like that i can't apply my limit and g...
I did that on my HA SKU 5508, rebooted the device and now i have following Situation:
(Cisco Controller) >show redundancy summary Redundancy Mode = SSO DISABLED Local State = ACTIVE Peer State = N/A Unit = Primary Unit ID ...
What do you mean with "Reverse the process", our HA WLC was bought as a HA WLC SKU = AIR-CT5508-HA-K9 . This WLC was never a Primary WLC.
But I'm no confused because of the following:
"Q. Can I convert the HA SKU for use as a primary controller and a...
