Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Allfor 802.1x authentication what should be the security policy confgiured on the WLC [WPA2][Auth(PSK)]or[WPA2][Auth(802.1X)]or?? hope to get some helpVR
hiHere is a scenarioLMS installed on virtual environment & PI appliance with upgrade license is purchased?how to proceed with the installation on the newly purchased PI appliance with upgrade license? considering LMS will be out of network after PI o...
hiDo Cisco provides device templates i.e Routers / Switches / Firewall / Wireless Lan controller / AP for Cisco Prime Infrastructure 2.0Minimum must required configuration on devices to be detected by PI thanks Vishal
HelloNewly purchased Laptops are built in with Windows 8 but ipsec Tunnel is not established with Cisco VPN client.With Windows 7 users IPSEC RA works ok.Firewall - Pix 525 running version 8.0 appreciate some assistancecheersvishal
Helloon a wlc 4400 series guest ssid configured, lately noticed Guest SSID is broadcasted but takes long to connect or at times dont connect.Other SSID configured with WPA2 works ok. Checked the followingIssue occurs on Smartphones and Laptops DHCP ...
Thanks Scott, some more inquiryhow to reboot the AP from the controller. ( I see 'Reset AP' - this option to reboot or something else)how to disconnect all users connected to specific SSID from controllerCan AP model 3702 work with WLC 5508, do we ...
Scott ACL works nowOne last info required - URL redirection not working. Redirection URL www.yahoo.com Multiple interface are there on WLC which one to allow for internet access to send the redirection traffic to internet
Hello Scottmy ACL >> permit ip any any in the end.ip access-list extended GUEST_DENYpermit ip 192.168.1.0 0.0.0.255 host 10.10.100.1deny ip 192.168.1.0 0.0.0.255 10.10.100.0 0.0.0.255deny ip 192.168.1.0 0.0.0.255 192.168.10.0 0.0.0.255deny ip ...
Scott removing the ACL all works great. what could be the issue on the ACLIn the ACL Line 1 - allowing guest vlan communication to local DNS serverLine 2 - 4 deny local networkLine 5 - allow anything elseWLC====Catalyst6500====firewall=====Inter...
