About johnlloyd_13

johnlloyd_13 · 08-06-2024

hi,i'd like to upgrade my N9K from 10.1.1 to 10.xper note on the cisco link, for non GX platform, i just use the plain nxos.10.x.x.bin file.i've scrolled all 10.x and most are nxos64 .bin files and the only 32-bit is 10.1.2the current recommended/gol...

johnlloyd_13 · 07-31-2024

hi,i'm trying to configure a new N9K and issued the "feature privilege" command but didn't accept it.how can i enable this feature?the NX-OS is 10.1N9K(config)# feature privilege^% Invalid command at '^' marker.N9K(config)# feature ?analytics Enable/...

johnlloyd_13 · 07-25-2024

hi,i have an ASA 5525-X in multiple context mode. i already removed unused context and only left with 'admin' context which has a couple of S2S ipsec VPN configured.i plan to convert the ASA to single and just wondering if all config especially the I...

johnlloyd_13 · 06-21-2024

hi,i just received a new ASR920 from an RMA.i would like to know if i can transfer the 'startup-config' from the current/faulty ASR920, then do a 'copy nvram:start run' in the new/RMA ASR920 and save?i just edit these lines to reflect the new chassis...

johnlloyd_13 · 05-29-2024

hi,i'm reviewing the 3100 FW data sheet and would like to learn more on the "stateful inspection firewall throughput (multiprotocol)".can someone expound on this? is the throughput refer to the "full duplex" in an interface? i.e. in a 3105 it's 9.0 G...

johnlloyd_13 · 08-06-2024

hi pavel,i used the upgrade matrix tool, so are you suggesting that i upgrade: 10.1(1) > 10.2(7)M > 10.3(5)M?so i use the 64-bit NX-OS files?nxos64-cs.10.2.7.M.binnxos64-cs.10.3.5.M.binthere's a caveat in the release notes that non-GX platform should...

johnlloyd_13 · 08-02-2024

hi,i use SFP-10G-SR on my 3100 to nexus switch.buy cisco genuine SFP to avoid headache/compatibility issue when using third party SFP.Name: "Ethernet 1/9", DESCR: "10gbase-sr"

johnlloyd_13 · 08-01-2024

it seems 'feature privilege' and 'enable secret' was discontinued in NX-OS 10.xit's hard to find a cisco nexus doc related to this but found a thread in github instead.https://github.com/ansible-collections/cisco.nxos/issues/304

johnlloyd_13 · 07-25-2024

hi,you want to use a nexus switch if you've got SAN and server farm.you also leverage vPC which is used in nexus platform.catalyst use VSS in bigger platforms, 6500, 9300, 9500 etc.

johnlloyd_13 · 07-21-2024

hi,i use cisco 3560C-8PC-S (8 port) in my lab.i got these for a cheap price and it's quiet/fanless.i'd suggest get 2 as a start then just add another if you got the budget and want to do more complex lab scenarios.if you got friends in the IT/network...

Member Since	‎12-02-2007 03:31 AM
Date Last Visited	‎07-26-2024 12:34 AM
Posts	3,748
Total Helpful Votes Received	1493

User Statistics

User Activity

Cisco Nexus 9300 NX-OS 10.x Upgrade

Cisco Nexus 9000 "feature privilege"

Convert ASA from Multiple Context to Single Mode

Cisco ASR920 RMA - startup-config

Get actual througput in Cisco ASA

Re: Cisco Nexus 9300 NX-OS 10.x Upgrade

Re: Cisco Secure Firewall 3100 Series

Re: Cisco Nexus 9000 "feature privilege"

Re: Can I use the Nexus switch as a core switch? If not, why can't I u

Re: Best used eBay L3 switch to get?