About Eugene Khoo

Eugene Khoo · 11-23-2021

Hi,I'm trying to segregate our network due to areas with public access (and WiFi) and physical ports.To not disrupt things, the base VLAN (1) has internet access via 192.168.101.11. I've created VLAN 20 and 40 (192.168.20.1 and 192.168.40.1) - switch...

Eugene Khoo · 10-17-2015

Hi,I've deployed a total of 15 WAP321s in 3 sites and every time I order a batch (3-4 units) for a client deployment, I'm almost certain (100% for the past 3 orders) to have half the WAPs fail within 2-3 days of deployment. Just last week, I received...

Eugene Khoo · 10-16-2015

Hi,I have 4 SG300-28P switches in L3 mode.They are connected to a Netgear FV336G Dual WAN router which provides 3 networks (VLAN1, VLAN 30 and VLAN 40), it has 3 different DHCP scopes for each VLAN. VLAN1 = 192.168.101.x, VLAN 30 = 192.168.30.x and V...

Eugene Khoo · 07-31-2013

Hi,I've an SG300-28P as a primary switch. Three WAP321 APs are connected with two SSIDs. A main SSID is served on VLAN 1 and a guest SSID is served on VLAN 2.On the SG300, I have three trunk ports for the WAP321s since they carry VLAN 1 & VLAN 2. Por...

Eugene Khoo · 09-06-2023

Hi David -- like Balaji mentioned above - nothing is wrong on the switch config. Each switch has the VLANs configured (or they're auto added anyway since the SFP ports carry all the VLANs. The config required was on the router to add the required VLA...

Eugene Khoo · 11-24-2021

Thanks. Realized I've done this before.Added VLANs and the 20.x and 40.x IPs on the router and all works now.

Eugene Khoo · 10-23-2015

Well, I did take the plunge and I've moved DHCP off the router and now VLAN routing is on the switch. 5 VLANs, 5 DHCP scopes and one router.

Eugene Khoo · 10-18-2015

I check an old Service Request with my Cisco partner for a previous WAP321 that I returned and the serial number is very similar - SER1828006D and SER1828006E

Eugene Khoo · 10-18-2015

Hi jbattist,I've resolved the issue by setting the trunk port to 1UP, 30T and 40T on my test environment (SG300-10, WAP371 and Netgear FV318SG) and will try to replicate on the production network later this week.

Member Since	‎07-31-2013 12:08 AM
Date Last Visited	‎09-13-2023 05:12 AM
Posts	15

User Statistics

User Activity

Multiple VLANS (and DHCP) but single Internet access

Extreme high number of DOA for WAP321s

SG300 VLANS

WAP321 VLANS and SG300 routing issue

Re: Multiple VLANS (and DHCP) but single Internet access

Re: Multiple VLANS (and DHCP) but single Internet access

Well, I did take the plunge

I check an old Service

Hi jbattist,I've resolved the