Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
Its a bit confusion with Fixed Releases for Bugs as Cisco provided different release versions in Security Advisory and Bug ID.
For Example: (CSCvg35618)
from Bug ID (last updated Feb 12, 2018): Known fixed releases are 9.6(4) and 9.1(7.20)...
Tx Power for 802.11b
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 23 dBm (199 mW) Tx Power Level 2 .......................... 20 dBm (100 mW) Tx Power Level 3 ...........................
Tx Power for 802.11b (2.4 GHz)
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 23 dBm (199 mW) Tx Power Level 2 .......................... 20 dBm (100 mW) Tx Power Level 3 .................
Hi ,AP: 2602i - software version:15.2.2.JA1WLC: 3850 -software 3.02.02 SEAP and WLC are in same subnet, APs are joining but not registering,, error is *spamApTask0: 1 wcm: %CAPWAP-3-SPI_TUNNEL_CREATE_ACK_NOT_REC: Dropping discovery request from AP ...
Hi,
Points to Check for FlexConnect CWA (ISE):
1) Redirect ACL should be created in Flexconnect ACL which will permit http & https to ISE and DNS, DHCP to respective severs
2) The same Flexconnect ACL need to added in FlexConnect Group ACL Mapping...
Hi ,
Hope this may help you,
Tx Power for 802.11b Num Of Supported Power Levels ............. 8 Tx Power Level 1 .......................... 23 dBm (199 mW) Tx Power Level 2 .......................... 20 dBm (100 mW) Tx Power Level...
Praveen,
Tried the cisco work arounds..?
Workaround:Potential workarounds: 1)Disable data-based rekeying:"crypto map set security-association lifetime kilobytes unlimited"2) clear crypto ipsec sa inactive3) Use IKEv1
Let know once applied.
