Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have seen that it is possible to stack two 5760 WLC for Active-Standby HA Deployments. However, I was wondering if it is possible to have an Active-Active deployment instead.
We currently have one 5760 Controller as Guest Anchor in the DMZ an...
Hi, We have several 8510 controllers and one of them needs to be configured as HA SKU for N+1 deployment. I am testing the scenario with two controllers right now, so I have the primary and the secondary controller configured as part of the same Mobi...
Hi, Does someone know when the release 8.1 for the 8510 WLC is coming? Does it going to support the New Mobility stuff? As far as I know, Cisco was planning to include this feature back again in version 8.1. Thank you. Joana.
Hi,I would like to know if a Foreign 8510 WLC is able to work with a 5760 Anchor Controller in the DMZ for the New Mobility Design. According to the documentation, a 8510 WLC is able to work as a Foreign controller although an Anchor deployment is n...
Hi,
First of all, thank you for your response.
Regarding the use of LACP from the CE to two PEs (Multi-Homed Device - MHD), this is supported as well.
I have found some interesting information about EVPN Multi-homed Networks which would be t...
Hi Pradeep,
My configuration was right from the beginning. I had to upgrade the 5760 Anchor Controller from version 03.03.01SE to version 03.03.04SE to resolve the redirection issue.
Joana
Hi,
Great, I didn't know foreing controllers were able to load balance connections automatically between anchor controllers. I will give it a try and I will let you know if it fixes the issue.
Thanks a lot,
Joana.
