Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I wonder if I can get some advice on switch options.
I am looking for a Cisco 2960 8 port with 2 dual purpose uplinks ( SFP and copper 1GB ).
I have seen in some places the 2960C-8TC-L has the 2 uplinks and then in another it doesn't. All Cisc...
I have an 8 port Cisco 2960 switch that is directly on the internet ( i.e. could have a public IP )
I would like to secure the switch but still be able to monitor it from the inside network through SNMP.
I have been advised by some I trust technica...
Hi,
Hoping someone can point me in the right direction.
We have a Cisco WLC with Cisco 1141 AP's and windows client devices connecting.
Recently we have noticed different clients will occasionally just loose connectivity even thought they might ha...
Hi, I wonder if someone could confirm if I have been asked to try the impossible. We have 2 servers with a NIC with dual 10GB links in each which have RJ45 ports. They need to connect to 2 switches at 10GB we will then have 20 other servers connectin...
Hi All, Hoping someone can clear this up for me. I am trying to setup a ASA 5510 with IOS 9.1 and having NAT issues. The ASA is connected inside the LAN to separate a second LAN. Internal (10.0.0.0/24) --> DG RTR (10.0.0.254) FE0/0--> FE0/1 (61.0.0.1...
Hi Prabath and Reza,
Thank you for coming back so quickly.
That is exactly the answers I was looking for and can only assume in my searches I missed the placement of the C.
Huge thank you I can now order the correct kit.
Hi thanks for the reply and confirmation that am on the right track.
There is no need to manage from the internet.
On the basis there is no need to manage it from the internet am I right in assuming that I only need to then protect it from internal...
Hi Reza, Thanks again for the reply.I will check the IOS on the switches we have got thanks for the note on that.When I was researching I looked at a couple of Nexus switches but was told they were far too expensive , if we do actually get the 3850 I...
Hi Reza, Thanks for the reply. I asked a supplier about a 10GB RJ45 ~SFP+ module and the part number they gave me with a google search showed something that wasn't even an SFP so not sure what that was maybe a zenpack (sorry not sure of spelling). Th...
Hi Jouni, Huge thank you for your explanations and time. It is now all working I am very happy to say. It turns out that without the NAT entries is correct and the edge firewall is configure allowing all any IP on the inside to be NAT'd. The issue wa...
